Search Entire Site English versionChinese version
|
|
|
|
|
|
|
   

   

Sensaphone IMS-1000 Specifications

Introduction | Features | Specifications | Applications | Downloads

Sensaphone IMS-1000 

Physical
Shipping Weight 8 lbs.
Dimensions 14"w x 1.75"h x 7"d
Telephone Connection (IMS-1002 Only)  FCC approved RJ-11 plug-in modular connector with 6' cord
Operating Temperature Range Unit should be kept between 32° F and 122°F
Status LEDS System ON, Battery OK, Output ON, Alarm
USB Ports (1) For Future Expansion (not yet available)
Mounting
1 EIA rack-mount  1 EIA rack-mount Rack Requirements: Standard 19" equipment
rack with supplied mounting bracket hardware. Requires
1.0 EIA rack mount space.
Tabletop Tabletop requirements: Flat area which can support an
enclosure 14" wide by 7" deep by 2"high.
IMS-1000 Operating Specifications
Temperature 32–122°F
Humidity 5-90% RH non-condensing
Power Supply  115VAC 60HZ 9VDC / 1 Amp
Power Consumption  10 Watts
Power Connection 2.1mm x 10mm jack
Backup Battery 6V 3.4AH sealed lead acid
Backup Time 3.5 Hours
Battery Service Life Under normal operating conditions, three to four years of
dependable service life can be expected or between 200
and 1000 charge/discharge cycles, depending on the
average depth of discharge.
IMS-1000 Communications Specifications
Ethernet  10/100 Base-T, 10/100Mbps
Protocols DHCP, TCP/IP, SNMP, HTTP, SMTP, POP, FTP
Modem (IMS-1002 Only) Voice / Modem 33.6Kbps, Fax Group 3, 14.4Kbps
Voice Processor (IMS-1002 Only)  Yes
Recordable Voice (IMS-1002 Only)  Yes, up to 30 custom messages
IMS-1000 Environmental Monitoring
Internal Monitoring AC Power (True RMS Voltage), Backup Battery Level
IP Device Monitoring up to 16 IP/Port Services
Number of Sensor Ports 8
Sensor Types Temperature, Humidity, Water, Power, Current, Infrared Motion,
Smoke, Dry Contact, 4-20mA
Temperature Sensing Range -109º F to 150º F with remote temperature sensor,
NRTL listed for compliance with U.L. Standard 60950-1
Sensor Input Connector RJ-45
Sensor Cables CAT-5, 568B
Cable Length 1000'
Visual Indicators LEDs, Normal and Alarm
Output Relays
Number Of Outputs 1
Output Type SPDT (Form C) Latching, 1A 30VAC or 1A 24VDC
Output mode Manual, Automatic on alarm
Warranty 3-year Limited Warranty

 

 
COPYRIGHT 2024 ALL RIGHTS RESERVED.